construction engineer pipeing welding
at
Reliance
, Jamnagar, INDIA
July 2004 – Currently Working
Industry: Construction/Engineering/Cement/Metals
Functional area: Production / Maintenance / Quality
Supervision of welding process like SAW, SMAW, GTAW, and FCAW
in material like C.S., S.S., Alloys.
Checking all the
joints in pipes visually, and also refer NDT results. Observing
piping drawings and line class for welding
joints.
Handling welder around 70 to 100 and large
manpower for production in shop.
Witnessing welder
qualification.
Welding process control, monitoring welding
production activities and follow up.
Responsible for
achieving targets of production set by management.
Welding
machines & consumables procurement, control, maintenance and
quality controlling.
Weld repair control, repair
rectification and Memo entry.
Inspection and certification
of production welding.
engineer welding at WELSPUN GUJARAT STAHL ROHREN LTD. , Bhuj, INDIA
July 2005 – June 2007
1) Supervision of welding process viz. GMAW, SAW,
SMAW.
2) Continual improvement in the M/C and in the process
to improve the productivity and cost
reduction.
3) Implementation WPS, PQR, WPQ, of welding
procedures as per API, ASME specifications.
4) Selection and
Advance planning of welding consumables as per customer
requirements.
5) Involved in finding, analyzing & eradication
of the cause of defect in welding. Involved in interpretation of
radiography film as per ASME SEC. IX and API 5L for line
pipes.
6) Material and manpower planning.
7) Fabrication
and inspection of welding m/c equipments during project
Modification and assembly of welding m/c.
8) Good
co-ordination with third party inspection agency.
9) Shift
handling in welding dept.
ACHIVEMENTS
• Successfully
trained the welding operators for operating welding process like
GMAW, SAW and SMAW.
• Design and fabricate wire drum rotating
stand and internal/external welding m/c platforms.
• Erection
and commissioning of flux recovery system and laser- tracking
system for out side welding m/c.
• Involved in fabrication &
machining of welding station machines viz. welding boom, welding
wagon.
Fettling incharge at Micro melt Pvt. Ltd , Rajkot, INDIA
July 2004 – May 2005
1) Investment as well as sand / shell casting of steel and alloy
steel for pump, automobile sector.
2) Rectification of defects
like porosity, gas pocket, slag, crack etc…
3) Inspection at
vendor place and vendor approval.
4) To carry out D.P. test for
cast and welded parts.
Fettling incharge at M/s. Creative Castings Ltd , junagadh, INDIA
August 1999 – May 2002
1) Investment as well as sand / shell casting of steel and alloy
steel for pump, automobile sector.
2) Rectification of defects
like porosity, gas pocket, slag, crack etc…
3) Inspection at
vendor place and vendor approval.
4) To carry out D.P. test for
cast and welded parts.