Sham Gandhi
Current
Service
Education
B.Tech/B.E. Electrical
Industry
IT-Software/Software Services
About Sham Gandhi
I am an Electronics Engineer with over 29 years of work experience primarily in CAD/CAM. I was working with Rolta India Limited as an Assistant Vice President – Production (GIS) for last 8 years. I was handling an overseas and domestic assignment with a team of 100 GIS specialist. We mainly work in Microstation-V7.1, ArcGIS, Geo-Media & G-Tech GIS Software.
Electrical and Mechanical documentation on CAD was my forte. Besides, I also have the abilities of planning, marketing, production and project execution. Having majored in Computer Science and Control Systems, I have also completed various certificate courses in Computer Aided Designs & Graphics. I also had the opportunity of attending numerous seminars on CAD/CAM.
During my association with NELCO, I gained valuable knowledge on interfaces to be implemented for right applications and was instrumental in making CAD- center as a commercial center. This enabled me to apply similar concept in implementing CAD-Technology in SIEMENS- R & D of Medical Engineering Dept. During the process, I evaluated various software like AutoCAD Rel.14, AutoSurf, 3Dsolid Modeling, CADstar, Pads-2000, PCAD, Orcad & Tango etc. The total project planned in three phases with a volume of Rs. 0.3 million was successfully implemented.
Electrical and Mechanical documentation on CAD was my forte. Besides, I also have the abilities of planning, marketing, production and project execution. Having majored in Computer Science and Control Systems, I have also completed various certificate courses in Computer Aided Designs & Graphics. I also had the opportunity of attending numerous seminars on CAD/CAM.
During my association with NELCO, I gained valuable knowledge on interfaces to be implemented for right applications and was instrumental in making CAD- center as a commercial center. This enabled me to apply similar concept in implementing CAD-Technology in SIEMENS- R & D of Medical Engineering Dept. During the process, I evaluated various software like AutoCAD Rel.14, AutoSurf, 3Dsolid Modeling, CADstar, Pads-2000, PCAD, Orcad & Tango etc. The total project planned in three phases with a volume of Rs. 0.3 million was successfully implemented.
Sham Gandhi ’s experience
Assistant Vice President - Production
at
Rolta India Limited (Geo-Engineering Div
, Mumbai, INDIA
July 2000 – October 2008
Industry: IT-Software/Software Services
Functional area: ITES / BPO / KPO / Customer Service / Operations
Roles and Responsibilities:
• Handled Road Navigation Project
for European Countries. • Monitored production for all
Geo-Engineering activities • Liaison with the Assistant
Managers and provided all assistance • Maintained production
schedules and estimated time frame for the
projects • Implemented and ensured adherence to the documented
quality system • Explored, devised and recommended quality and
productivity improvement mechanisms • Undertake corrective
measures to prevent rejections • Tested, evaluated and
approved new software updates • Co-coordinated between the
project support and the production team • Motivated and
counseled the staff for achieving higher productivity
• Reported to the Sr. Executive Director
for European Countries. • Monitored production for all
Geo-Engineering activities • Liaison with the Assistant
Managers and provided all assistance • Maintained production
schedules and estimated time frame for the
projects • Implemented and ensured adherence to the documented
quality system • Explored, devised and recommended quality and
productivity improvement mechanisms • Undertake corrective
measures to prevent rejections • Tested, evaluated and
approved new software updates • Co-coordinated between the
project support and the production team • Motivated and
counseled the staff for achieving higher productivity
• Reported to the Sr. Executive Director
Technical Executive at SIEMENS Limited, Medical Engineering Div , Mumbai, INDIA
February 1987 – September 1997
Roles and Responsibilities:
• Looked after the general
administration of the CAD center • Handled product design
engineering and PCB designing • Coordinated for all technical
aspects with the product design engineers, PCB manufacturers and
assembly sub-contractors • Performed the functions of a
technical trouble shooter • Tested, debugged, evaluated and
approved new software updates • Handled upcountry vendors with
almost 10-15 • Generated technical documents to interface
with CAE / CAM activities • Prepared electronics documents for
products • Reported to the R & D Manager
administration of the CAD center • Handled product design
engineering and PCB designing • Coordinated for all technical
aspects with the product design engineers, PCB manufacturers and
assembly sub-contractors • Performed the functions of a
technical trouble shooter • Tested, debugged, evaluated and
approved new software updates • Handled upcountry vendors with
almost 10-15 • Generated technical documents to interface
with CAE / CAM activities • Prepared electronics documents for
products • Reported to the R & D Manager
Administrator/Coordinator/Specialist at National Radio & Electronics Co. Ltd., C , Mumbai, INDIA
August 1984 – January 1987
Roles and Responsibilities:
• Entrusted with the onus for
design of product engineering, and PCB designing • Co-
coordinated with the manufacturing and the production
department • Handled time scheduling of layout designs on CAD
system • Designed multi-layered boards • Generated
mechanical documents on CAD on OMEGA 58000 Mini-frame Computer.
design of product engineering, and PCB designing • Co-
coordinated with the manufacturing and the production
department • Handled time scheduling of layout designs on CAD
system • Designed multi-layered boards • Generated
mechanical documents on CAD on OMEGA 58000 Mini-frame Computer.
Consultant at TechnoCad, Sakinaka, Mumbai , Mumbai, INDIA
July 1981 – July 1984
Roles and Responsibilities:
• Liaisoned with the clients and
the PCB designer • Designed the multilayered PCB with drafting
aids and CAD system • Devised time frame for PCB Design and
Computer • Reported to the proprietor
the PCB designer • Designed the multilayered PCB with drafting
aids and CAD system • Devised time frame for PCB Design and
Computer • Reported to the proprietor
Professional (e.g. Engg., IT Developer, Marketing Executive etc.) at Madhav Capacitors Pvt. Ltd., Mumbai , Mumbai, INDIA
October 1979 – June 1981
Roles and Responsibilities:
• Looked after the development of
power factor control relay and portable power factor
meter • Implemented product engineering and PCB designing
• Reported to the Sr. Manager (R & D)
power factor control relay and portable power factor
meter • Implemented product engineering and PCB designing
• Reported to the Sr. Manager (R & D)
Sham Gandhi ’s education
B.Tech/B.E. [Electrical],
Veermata Jijabai Technological Institute [Currently,Studying]
, Maharastra, INDIA
Diploma [Electronics],
V.J.T.I., Mumbai [July,1979] , Mumbai, INDIA
Diploma [Computer Arts],
Edit Systems [October,1994] , Mumbai, INDIA
Diploma in Computer Aided graphi [Computer Aided graphics],
Shri Bhagubhai Mafatlal Polytechnic, Mumbai [October,1993] , Mumbai, INDIA
Sham Gandhi ’s additional information
Login to view additional information of Sham Gandhi
Hey there! Sham Gandhi is using SiliconIndia.
Benefits of SiliconIndia
- Find prospects, new employees or jobs
- Get mentored by industry experts
- Get daily news updates
- Get found in search engines (Google, yahoo)
- Find coworkers and batchmates
