Sarwar Karim
Current
instrumentation engineer
Education
bachlor... B.E
Sarwar Karim ’s experience
qa/qc engg
at
consolidated contractor international company
, doha qatar
Working/Currently
Incoming Material. Inspection.
Document Preparation (QCP/
ITP’S) Implementation of Aramco Quality Standards (SAES -J
-902, J - 901&SAES - B -068) Implementation of SABIC Quality
Standards for Control System and Field
instrumentation. Inspection for Hydro test (SAES - L
-054). Inspection for Instrument Installations. Inspection for
Cable Meggering &Continuity test Duties and Responsibilities :
Routine Area Surveillance of Instrumentation erection
activities Inspection & Witnessing according to Project
Specification and QCP & ITP Established field inspection &
Testing Procedures for E & I works with the assistance of Site
Project Engineers. Inspection for the Installation of
Field mounted Instruments, Junction Boxes, Local Panels,
Pneumatic Leak Test of Air Line Tubing /Impulse line tubing,
Insulation Resistance test and Continuity Check for Instrument
Cables. Inspection for the Installation of DCS Panel, ESD
Panel, Fire & Gas System Panel, Consoles & Computers with
Printer, Communication system panel and Weather Monitoring System
in the Main Control Building. Also witness the Electrical
HV & MV cable and Fibre Optic cable Splicing as per the approved
drawing and Specification Inspection for the Electrical &
Instrument Cable Trenches prior to cable Pulling and after Cable
Pulling to release for the next activities. Also inspection of
Cable ladders and Cable trays in the Field, Electrical
Substations, SIH and in the Main Control Buildings. Inspection
for the Field Electrical and Instrumentation cables, Underground
and Above ground cables and Fiber Optic Cable
Installation Inspection for the Installation of Grounding
Cable and Bus bar in the Field and Buildings and Connection to
the equipment as per the approved drawing and
specification. Inspection for the Installation of Fire &
Gas System in the Field such as Push Button, Horn & Beacon and
Fire Detection System. Also Responsible for witnessing
Combined Instrument Loop check and Calibration of Pressure
transmitter, Flow, Differential, Relief Valves, Level
Transmitter, gauges and other Instrument devices. Also
Coordinates with Clients Project Inspection Unit for project
Inspection and Stage wise activities for Witness or Hold
Points. Mechanical completion Inspection for MCCR release,
Area Punching and Punchlisting, Processing and Updation of QC
documentation, QC Dossier and Implementing the QC
plan. Co-ordinating with Consultant and Clients for the
final acceptance of the plant hand over. Assists in the
Preparation, Review and Updating of Company’s Quality Control
manual and operating procedures in accordance with the ISO 9000
Quality Control System. Preparing QCP’s and ITP’s and
Inspection Checklist for procurement and construction according
to Project quality Plan (PQP). Preparing and Answering
Project technical Query (PTQ) Overseas the Documents
Control management and ensures the availability of Current Client
Engineerig Standards, procedures and industrial Codes and
Standard. Familiar with International standards NACE,
ASTM, DIN, BSI, IEC, ANSI, API, NEC, NEMA Also responsible
for Checking, verifying and Reviewing the Construction drawings
Covering Specification, IFC, P&ID, ILD,HOOK UP,LAYOUT Drawings
and other attachments prior to installation. Effectively
Co-ordinates with other related disciplines. Also aware of
Safety rules and regulations, Conducted weekly safety Auditing
and reporting, participated weekly safety meetings and familiar
with all relevant safety induction like 100% Fall Protection,
Confined Space Entry and Precommissioning priority.
ITP’S) Implementation of Aramco Quality Standards (SAES -J
-902, J - 901&SAES - B -068) Implementation of SABIC Quality
Standards for Control System and Field
instrumentation. Inspection for Hydro test (SAES - L
-054). Inspection for Instrument Installations. Inspection for
Cable Meggering &Continuity test Duties and Responsibilities :
Routine Area Surveillance of Instrumentation erection
activities Inspection & Witnessing according to Project
Specification and QCP & ITP Established field inspection &
Testing Procedures for E & I works with the assistance of Site
Project Engineers. Inspection for the Installation of
Field mounted Instruments, Junction Boxes, Local Panels,
Pneumatic Leak Test of Air Line Tubing /Impulse line tubing,
Insulation Resistance test and Continuity Check for Instrument
Cables. Inspection for the Installation of DCS Panel, ESD
Panel, Fire & Gas System Panel, Consoles & Computers with
Printer, Communication system panel and Weather Monitoring System
in the Main Control Building. Also witness the Electrical
HV & MV cable and Fibre Optic cable Splicing as per the approved
drawing and Specification Inspection for the Electrical &
Instrument Cable Trenches prior to cable Pulling and after Cable
Pulling to release for the next activities. Also inspection of
Cable ladders and Cable trays in the Field, Electrical
Substations, SIH and in the Main Control Buildings. Inspection
for the Field Electrical and Instrumentation cables, Underground
and Above ground cables and Fiber Optic Cable
Installation Inspection for the Installation of Grounding
Cable and Bus bar in the Field and Buildings and Connection to
the equipment as per the approved drawing and
specification. Inspection for the Installation of Fire &
Gas System in the Field such as Push Button, Horn & Beacon and
Fire Detection System. Also Responsible for witnessing
Combined Instrument Loop check and Calibration of Pressure
transmitter, Flow, Differential, Relief Valves, Level
Transmitter, gauges and other Instrument devices. Also
Coordinates with Clients Project Inspection Unit for project
Inspection and Stage wise activities for Witness or Hold
Points. Mechanical completion Inspection for MCCR release,
Area Punching and Punchlisting, Processing and Updation of QC
documentation, QC Dossier and Implementing the QC
plan. Co-ordinating with Consultant and Clients for the
final acceptance of the plant hand over. Assists in the
Preparation, Review and Updating of Company’s Quality Control
manual and operating procedures in accordance with the ISO 9000
Quality Control System. Preparing QCP’s and ITP’s and
Inspection Checklist for procurement and construction according
to Project quality Plan (PQP). Preparing and Answering
Project technical Query (PTQ) Overseas the Documents
Control management and ensures the availability of Current Client
Engineerig Standards, procedures and industrial Codes and
Standard. Familiar with International standards NACE,
ASTM, DIN, BSI, IEC, ANSI, API, NEC, NEMA Also responsible
for Checking, verifying and Reviewing the Construction drawings
Covering Specification, IFC, P&ID, ILD,HOOK UP,LAYOUT Drawings
and other attachments prior to installation. Effectively
Co-ordinates with other related disciplines. Also aware of
Safety rules and regulations, Conducted weekly safety Auditing
and reporting, participated weekly safety meetings and familiar
with all relevant safety induction like 100% Fall Protection,
Confined Space Entry and Precommissioning priority.
Sarwar Karim ’s education
bachlor of engineearing [B.E],
k.b.c college of engineearing [2005/June]
, gulbarga ,karnatka
Sarwar Karim ’s additional information
Login to view additional information of Sarwar Karim
Hey there! Sarwar Karim is using SiliconIndia.
Benefits of SiliconIndia
- Find prospects, new employees or jobs
- Get mentored by industry experts
- Get daily news updates
- Get found in search engines (Google, yahoo)
- Find coworkers and batchmates
