Lighting Automation and GREEN BUILDING MATERIALS FOR PROJECTS

We belong to the Pammvi Group of Companies having diversified activities in various divisions. In the Energy Conservation division, we represent European Companies and marketing their Occupancy, Motion Sensors, ESENZETM Energy Saving lamps, Wireless Switches etc. in India.
STEINEL Occupancy & Motion Sensors / Lights with inbuild sensor.

Primarily sensors are used for energy conservation which we believe would be widely welcomed for various applications. Principally, these sensors operate on human presence and ambient light conditions and have the capability to handle multiple electrical fixtures with a single sensor installation.
Invariably lights, fans and or unit Air conditioners are left operating even when there is no occupancy and our devices aim at curtailing this energy wastage in a very simply but effective way. It is well proven that occupancy or outdoor sensors generate energy savings in excess of 60% in most areas of application with a short turn around / payback period. You can connect our sensors to all air conditioners and lights in corridors, officers chambers, toilets etc. thereby saving substantial amount of energy

ESENZETM Energy Saving Lamps for High Mass Lighting and Compound Lights.
The said ESENZETM product is manufactured in Europe. Any H.I.D. lamp including metal halide, sodium vapor lamps, mercury vapor lamps, halogen lamp, and incandescent lamp can be fitted with our ESENZETM Energy Saving Lamp. – Suitable for applications like High Mass Lighting, Street Light, flood lights, lights installed in warehouses etc.



The dimming levels and the desired time can be programmed flexibly by the end users from 15% up to 40% depending upon the user’s requirement. The dimming module is approximately 40 mm in diameter and 70 mm in length giving it the flexibility to be placed inside the existing lamp fixtures. This is suitable for all Metal halides, Floodlights, Sodium Vapor lamps, Mercury Vapor lamps, Halogen lamps, incandescent lamps etc where several energy is bleeding because of the said lamps being ON with full brightness when it is actually not required.

We have observed that there are several places were timers are used. However where timers are installed the basic problem is that when the lights are switched on there is 100% luminous irrespective whether the said luminous is required, in addition to by switching on the lamps completely when required, security issues are being compromised.

ESENZETM EasyClick System Wireless Switching for Lighting and Airconditioners :



ESENZETM EasyClick System uses the state of art German manufactured technology. A soft finger-touch creates an electric impulse and which occurs without any power source. This energy creates a radio signal on the 868 Mhz frequency that can activate various electronic items, existing light sources, shutters, blind motors, airconditioners etc.
In new constructions, the place where the lights are to be installed, the wires and cables are only required upto that point and there is no need of any switches or wires upto the switch board, which is there at present. The said system can be integrated and is very useful in Building management systems.



After interior decoration has been completed and if any new item installed requiring electrical power source is required, one has to incur costs on wiring ,new switches, masonry and repainting and all these costs could be avoided and substantial time saved by installing ESENZETM EasyClick System.



In large commercial establishments, the ESENZETM EasyClick System could be used with the receiver been connected to the existing circuit and transmitter kept at a convenient place for easy operation and saving substantial amount of electricity costs when lights and other electrical devices are not required.
Link: http://jobs.monsterindia.com/details/7544642.html?sig=js-1-ae81c0e47602e8ed3026f0ec5064ecf6-1